A study on influences of some process parameters on cold drawing of ferrous wires

Basit Öğe Kaydı
dc.contributor.authorCetinarslan, Cem S.
dc.date.accessioned2024-06-12T11:17:19Z
dc.date.available2024-06-12T11:17:19Z
dc.date.issued2012
dc.departmentTrakya Üniversitesien_US
dc.description.abstractWire drawing process involves pulling metal wire road through a die by means of a tensile force applied to exit side of die. This paper is an experimental study that presents influences of some parameters like deformation (total reduction) ratio and drawing speed on cold drawing of ferrous wires. Wire drawing method is applied to C45, C63, C65 and C70 materials for different deformation ratios and different drawing velocities. Subsequently, these process influences are considered by means of tensile and torsion tests. With these investigations, it can be simply observed that the deformation ratio and drawing speed parameters clearly affect tensile and torsion strength (number of twist) of ferrous materials. In addition to these observations, from the results of experiments it can be concluded that C content is also effective on tensile and torsion strength of steel wires. Finally, tensile strength and twist number values are obtained for C45, C65 and C70 wire material as functions of drawing speed and deformation (total reduction) ratio by using the statistical analysis from the experimental data.en_US
dc.identifier.endpage228en_US
dc.identifier.issn0971-4588
dc.identifier.issn0975-1017
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-84866168756en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage221en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14551/24668
dc.identifier.volume19en_US
dc.identifier.wosWOS:000309802200001en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherNatl Inst Science Communication-Niscairen_US
dc.relation.ispartofIndian Journal Of Engineering And Materials Sciencesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWire Drawingen_US
dc.subjectDeformation (Reduction) Ratioen_US
dc.subjectDrawing Speeden_US
dc.subjectTensile Testen_US
dc.subjectTorsion Testen_US
dc.subjectSteelen_US
dc.subjectDeformationen_US
dc.subjectStrengthen_US
dc.subjectQualityen_US
dc.titleA study on influences of some process parameters on cold drawing of ferrous wiresen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu