A study on influences of some process parameters on cold drawing of ferrous wires
Küçük Resim Yok
Tarih
2012
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Natl Inst Science Communication-Niscair
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Wire drawing process involves pulling metal wire road through a die by means of a tensile force applied to exit side of die. This paper is an experimental study that presents influences of some parameters like deformation (total reduction) ratio and drawing speed on cold drawing of ferrous wires. Wire drawing method is applied to C45, C63, C65 and C70 materials for different deformation ratios and different drawing velocities. Subsequently, these process influences are considered by means of tensile and torsion tests. With these investigations, it can be simply observed that the deformation ratio and drawing speed parameters clearly affect tensile and torsion strength (number of twist) of ferrous materials. In addition to these observations, from the results of experiments it can be concluded that C content is also effective on tensile and torsion strength of steel wires. Finally, tensile strength and twist number values are obtained for C45, C65 and C70 wire material as functions of drawing speed and deformation (total reduction) ratio by using the statistical analysis from the experimental data.
Açıklama
Anahtar Kelimeler
Wire Drawing, Deformation (Reduction) Ratio, Drawing Speed, Tensile Test, Torsion Test, Steel, Deformation, Strength, Quality
Kaynak
Indian Journal Of Engineering And Materials Sciences
WoS Q Değeri
Q4
Scopus Q Değeri
Q3
Cilt
19
Sayı
4
