SIMULATION OF HELICAL GEAR FORMING OF AZ31 MAGNESIUM MATERIAL

Basit Öğe Kaydı
dc.authoridAYER, ONDER/0000-0001-8970-145X
dc.authoridAYER, ONDER/0000-0001-8970-145X;
dc.authorwosidAYER, ONDER/ABA-3901-2020
dc.authorwosidAYER, ONDER/HGD-5388-2022
dc.authorwosidAYER, ONDER/P-8879-2015
dc.contributor.authorAyer, Onder
dc.date.accessioned2024-06-12T10:54:07Z
dc.date.available2024-06-12T10:54:07Z
dc.date.issued2017
dc.departmentTrakya Üniversitesien_US
dc.description.abstractThe simulation of helical gear forming is investigated in this study. AZ31 type magnesium material was selected for workpiece material because of its high specific strength. The finite element method was used to simulate the closed die upsetting method for magnesium material of helical gear upsetting. Three dimensional finite element analyses were carried out to obtain the forming load, effective stress, effective strain and temperature change with DEFORM-3D software.en_US
dc.identifier.doi10.12913/22998624/70998
dc.identifier.endpage191en_US
dc.identifier.issn2299-8624
dc.identifier.issue2en_US
dc.identifier.startpage187en_US
dc.identifier.urihttps://doi.org/10.12913/22998624/70998
dc.identifier.urihttps://hdl.handle.net/20.500.14551/18931
dc.identifier.volume11en_US
dc.identifier.wosWOS:000406451100025en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherLublin Univ Technology, Polanden_US
dc.relation.ispartofAdvances In Science And Technology-Research Journalen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAZ31en_US
dc.subjectGear Formingen_US
dc.subjectHelical Gearsen_US
dc.subjectFEMen_US
dc.subjectDEFORM-3Den_US
dc.subjectLateral Extrusionen_US
dc.subjectSpur Gearen_US
dc.subjectDieen_US
dc.subjectTechnologyen_US
dc.titleSIMULATION OF HELICAL GEAR FORMING OF AZ31 MAGNESIUM MATERIALen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu