A theoretical and experimental study for forward extrusion of clover sections

Basit Öğe Kaydı
dc.authoridAYER, ONDER/0000-0001-8970-145X
dc.authoridAYER, ONDER/0000-0001-8970-145X
dc.authorwosidAYER, ONDER/ABA-3901-2020
dc.authorwosidAYER, ONDER/HGD-5388-2022
dc.contributor.authorAltinbalik, Tahir
dc.contributor.authorAyer, Onder
dc.date.accessioned2024-06-12T11:01:45Z
dc.date.available2024-06-12T11:01:45Z
dc.date.issued2008
dc.departmentTrakya Üniversitesien_US
dc.description.abstractForward extrusion of clover section from different billet diameters has been investigated. The die profile is given by radius function to construct the new kinematically admissible velocity fields for three dimensional extrusion and then by using the upper bound method total extrusion loads are obtained. In the experimental studies, lead billets which having same initial heights but three different diameters have been extruded with the same strokes in order to verify the analysis. Die land length/billet diameter ratio was taken equal or greater than 0.6 as recommended in literature. A good agreement was found between the measured and the predicted load and so it is suggested that present analysis could be used the other commercial materials. (C) 2007 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2007.05.004
dc.identifier.endpage1189en_US
dc.identifier.issn0261-3069
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-40849098569en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage1182en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2007.05.004
dc.identifier.urihttps://hdl.handle.net/20.500.14551/20994
dc.identifier.volume29en_US
dc.identifier.wosWOS:000255715800011en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectExtrusionen_US
dc.subjectUpper Bound Analysisen_US
dc.subjectCloveren_US
dc.subjectUpper Bound Analysisen_US
dc.subjectCold-Extrusionen_US
dc.subjectDie Landen_US
dc.subject3-Dimensional Extrusionen_US
dc.subjectAluminum Extrusionen_US
dc.subjectDesignen_US
dc.subjectGearen_US
dc.titleA theoretical and experimental study for forward extrusion of clover sectionsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu