An approach for calculation of press loads in closed - die upsetting of gear blanks of gear pumps

Basit Öğe Kaydı
dc.contributor.authorAltinbalik, Tahir
dc.contributor.authorAkata, H. Erol
dc.contributor.authorCan, Yilmaz
dc.date.accessioned2024-06-12T11:20:31Z
dc.date.available2024-06-12T11:20:31Z
dc.date.issued2007
dc.departmentTrakya Üniversitesien_US
dc.description.abstractSome results of an industrial research and development project aimed to develop the manufacturing technologies of gear pumps were presented. Gear blanks of gear pumps that have traditionally been produced by machining from round bars in an industrial company were closed-die forged as an alternative. A comparison method of mechanical properties of the manufacturing methods was published formerly. A classical method was applied to calculation of press loads in closed-die upsetting of gear blanks of gear pumps and results were compared with those of measured in the experimental part of the work. Commercially pure lead was used as test material. In addition to comparison of calculated and measured loads, contributions of the method applied on the manufacturing costs of gear blanks were also discussed in the study. (c) 2005 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2005.07.009
dc.identifier.endpage734en_US
dc.identifier.issn0264-1275
dc.identifier.issn1873-4197
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-33750334702en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage730en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2005.07.009
dc.identifier.urihttps://hdl.handle.net/20.500.14551/25650
dc.identifier.volume28en_US
dc.identifier.wosWOS:000242859100047en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subject[No Keywords]en_US
dc.titleAn approach for calculation of press loads in closed - die upsetting of gear blanks of gear pumpsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu