Three point load application in single tooth bending fatigue test for evaluation of gear blank manufacturing methods

Basit Öğe Kaydı
dc.contributor.authorAkata, E
dc.contributor.authorAltinbalik, MT
dc.contributor.authorÇan, Y
dc.date.accessioned2024-06-12T11:01:48Z
dc.date.available2024-06-12T11:01:48Z
dc.date.issued2004
dc.departmentTrakya Üniversitesien_US
dc.description.abstractThis study deals with the applicability of a single tooth bending fatigue test in the evaluation of gear blank manufacturing methods using three point bending loading. The single tooth bending test is an effective and rapid way of determination of the performances of gears instead of expensive and time-consuming life tests. Bending tests were applied to two groups of gears cut by hobbing and gear shaving from gear blanks. The first group of gear blanks was obtained by CNC-lathe machining from round bars and the second group of blanks was produced by closed-die upsetting. Both of the gear groups were additionally tested after case hardening by carburizing. It was shown that the three point bending test can easily be adapted and applied as an effective and rapid way of comparing the performances of such gears. (C) 2003 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.ijfatigue.2003.11.003
dc.identifier.endpage789en_US
dc.identifier.issn0142-1123
dc.identifier.issue7en_US
dc.identifier.scopus2-s2.0-1842854048en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage785en_US
dc.identifier.urihttps://doi.org/10.1016/j.ijfatigue.2003.11.003
dc.identifier.urihttps://hdl.handle.net/20.500.14551/21028
dc.identifier.volume26en_US
dc.identifier.wosWOS:000221376600011en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofInternational Journal Of Fatigueen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFatigueen_US
dc.subjectThree Point Bendingen_US
dc.subjectGear Blanken_US
dc.titleThree point load application in single tooth bending fatigue test for evaluation of gear blank manufacturing methodsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu