An Optimization Study for Bridge Design of a Porthole Extrusion Die

Basit Öğe Kaydı
dc.authoridAYER, ONDER/0000-0001-8970-145X
dc.authorwosidAYER, ONDER/P-8879-2015
dc.contributor.authorAyer, Onder
dc.contributor.authorOzmen, Burcu Gizem
dc.contributor.authorKarakaya, Ismail
dc.date.accessioned2024-06-12T11:12:37Z
dc.date.available2024-06-12T11:12:37Z
dc.date.issued2019
dc.departmentTrakya Üniversitesien_US
dc.description.abstractIn this study, a porthole die extrusion simulation was carried out for a box profile by using HyperXtrude Inspire Extrude Metal 2019 which is a FEM based software. Aluminum AA6063 material was the billet material, temperature of the billet was 450 degrees C and ram speed was selected as 5 mm/sec. The die design was obtained according to the shape of the bridges of the porthole die. Finally, the design optimization was achieved by analyzing FEM results. It was obtained that the dies which have curved bridges offer optimum process conditions.en_US
dc.description.sponsorshipeksenAL Aluminum Extrusion Die Factoryen_US
dc.description.sponsorshipAuthors also wish to thank eksenAL Aluminum Extrusion Die Factory for their support for this study.en_US
dc.identifier.endpage275en_US
dc.identifier.issn2080-4075
dc.identifier.issn2299-8624
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85122098113en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage270en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14551/23247
dc.identifier.volume13en_US
dc.identifier.wosWOS:000514802000001en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherLublin Univ Technology, Polanden_US
dc.relation.ispartofAdvances In Science And Technology-Research Journalen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPorthole Die Extrusionen_US
dc.subjectFEMen_US
dc.subjectAluminum 6063en_US
dc.subjectStress Distributionen_US
dc.subjectDie Deflectionen_US
dc.subjectAluminumen_US
dc.subjectSeamsen_US
dc.titleAn Optimization Study for Bridge Design of a Porthole Extrusion Dieen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu