Characterization of Properties in Friction Welded Stainless Steel and Copper Materials
Küçük Resim Yok
Tarih
2013
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The aim of this study is to investigate the metallurgical and mechanical properties of friction welded stainless steel-copper joints. One of the manufacturing methods used to produce parts made from different materials is the friction welding method. Application of classical welding techniques to such materials is difficult because of they have different thermal properties. Stainless steel-copper joints are inevitable for certain applications due to unique performances such as higher electric conductivity, heat conductivity, corrosion resistance, and mechanical properties. In the present study, austenitic stainless steel and copper parts were joined by friction welding. Tensile, fatigue, and notch-impact tests were applied to friction welded specimens, and the results were compared with those for the original materials. Microstructure, energy dispersive x-ray, and x-ray diffraction (XRD) analysis and hardness variations were conducted on the joints. Results showed that various intermetallic phases such as FeCu4 and Cu2NiZn occurred at the interface. It was found from the microstructure and XRD analysis that intermetallic phases formed in the interface which further caused a decrease in the strength of the joints. However, hardness of the copper increased slightly, whereas the hardness of steel decreases slightly on the horizontal distance from the center.
Açıklama
Anahtar Kelimeler
Friction Welding, Mechanical Characterization, Metallography, Dissimilar Joints, Electron-Beam, Aisi-304, Carbon
Kaynak
Journal Of Materials Engineering And Performance
WoS Q Değeri
Q3
Scopus Q Değeri
Q2
Cilt
22
Sayı
3
