Analysis of spur gear forms with tapered tooth profile

Basit Öğe Kaydı
dc.authoridMISIRLI, Cenk/0000-0001-6584-2629
dc.authorwosidMısırlı, Cenk/IZD-5888-2023
dc.contributor.authorCan, Yimaz
dc.contributor.authorMisirli, Cenk
dc.date.accessioned2024-06-12T11:07:29Z
dc.date.available2024-06-12T11:07:29Z
dc.date.issued2008
dc.departmentTrakya Üniversitesien_US
dc.description.abstractThis paper presents an analysis of the lateral extrusion of spur gear forms and a comparative evaluation of the methods of lateral extrusion and closed die forging of spur gear forms in terms of mechanical properties of the product. An upper bound solution for lateral extrusion of spur gear forms with tapered tooth profile has been developed. A kinematically admissible velocity field has been proposed. From the proposed velocity field the upper bound solution on relative punch pressure and extrusion load are determined with respect to chosen process parameters. The obtained results are compared with experimental results in order to illustrate the validity of the proposed velocity fields. This indicates that the analysis presented here renders better upper bound solution before corner filling occurs. In addition, gear forms of the same dimension have been produced by both lateral extrusion and closed die forging. The fatigue and hardness tests were applied to gear teeth produced by both processes. The fatigue tests were applied in a manner of three point bending tests. The effect of forming method on the fatigue behavior at the roots of gear teeth and hardness distribution along the radial direction of the tooth are investigated. (c) 2007 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2007.03.015
dc.identifier.endpage838en_US
dc.identifier.issn0261-3069
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-38949168785en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage829en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2007.03.015
dc.identifier.urihttps://hdl.handle.net/20.500.14551/22067
dc.identifier.volume29en_US
dc.identifier.wosWOS:000255008300014en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectLateral Extrusionen_US
dc.subjectClosed Die Forgingen_US
dc.subjectSpur Gear Formen_US
dc.subjectUpper Bounden_US
dc.subjectFatigue Strengthen_US
dc.subjectUpper-Bound Analysisen_US
dc.subjectLateral Extrusionen_US
dc.subjectSplinesen_US
dc.subjectElementsen_US
dc.titleAnalysis of spur gear forms with tapered tooth profileen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu