Finite Element Analysis of Gear Like Form by Using Lateral and Forward Extrusion

Basit Öğe Kaydı
dc.authoridAYER, ONDER/0000-0001-8970-145X
dc.authoridAYER, ONDER/0000-0001-8970-145X
dc.authorwosidAYER, ONDER/P-8879-2015
dc.authorwosidAYER, ONDER/ABA-3901-2020
dc.authorwosidAYER, ONDER/HGD-5388-2022
dc.contributor.authorAltinbalik, Tahir
dc.contributor.authorAyer, Onder
dc.date.accessioned2024-06-12T11:01:45Z
dc.date.available2024-06-12T11:01:45Z
dc.date.issued2014
dc.departmentTrakya Üniversitesien_US
dc.description.abstractThe aim of this research is the reduction in deformation load, improvement of the mechanical properties of the product by means of an optimum forming process and die profile. Forward extrusion and lateral extrusion were chosen as two different forming methods to manufacture a spur gear form. Four different die geometries were chosen for the forward extrusion; including straight tapered transition profile and cosine transition profile with having two different die lengths. Al 1070 was used as workpiece material in the experimental study. Experiments using five sets of dies with spur gear form were performed, and the measured forming load results were compared with the predictions of the finite element method for the same deformation situations by using DEFORM-3D. The state of stress and strain was also determined for two forming methods by means of DEFORM-3D. Finally, a series of fatigue tests were carried out for four teeth gear forms produced by both processes to evaluate influence of the forming processes.en_US
dc.identifier.endpage147en_US
dc.identifier.issn2217-8309
dc.identifier.issn2217-8333
dc.identifier.issue2en_US
dc.identifier.startpage140en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14551/20993
dc.identifier.volume3en_US
dc.identifier.wosWOS:000218909800007en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.language.isoenen_US
dc.publisherAssoc Information Communication Technology Education & Scienceen_US
dc.relation.ispartofTem Journal-Technology Education Management Informaticsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectExtrusionen_US
dc.subjectSpur Gearen_US
dc.subjectDEFORM 3-Den_US
dc.subjectOptimal Die Profileen_US
dc.subjectFatigueen_US
dc.titleFinite Element Analysis of Gear Like Form by Using Lateral and Forward Extrusionen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu