Influence of extrusion parameters on drilling machinability of AZ31 magnesium alloy

Basit Öğe Kaydı
dc.authoridKöklü, Uğur/0000-0002-9205-9768
dc.authoridKoçar, Oğuz/0000-0002-1928-4301
dc.authoridAYER, ONDER/0000-0001-8970-145X
dc.authorwosidKöklü, Uğur/AAQ-1387-2020
dc.authorwosidKoçar, Oğuz/HJH-3647-2023
dc.authorwosidAYER, ONDER/P-8879-2015
dc.contributor.authorKoklu, Ugur
dc.contributor.authorKocar, Oguz
dc.contributor.authorMorkavuk, Sezer
dc.contributor.authorGiasin, Khaled
dc.contributor.authorAyer, Onder
dc.date.accessioned2024-06-12T10:54:07Z
dc.date.available2024-06-12T10:54:07Z
dc.date.issued2022
dc.departmentTrakya Üniversitesien_US
dc.description.abstractAZ31 magnesium alloy is mainly used in aerospace applications due to its lightweight and good mechanical properties. The installation of AZ31 alloy in an aircraft usually requires machining operations such as drilling and milling for assembly purposes. The current study aims to investigate the effects of different extrusion ratios (1.77, 2.68, 3.55) on the drilling machinability of AZ31 alloys. The machinability was evaluated with thrust force, borehole surface quality, and chip characteristics. It was found that the thrust force and hole quality depend on the extrusion ratio and cutting parameters. The highest thrust force and surface roughness R-a occurred when drilling AZ31 alloy produced using the highest extrusion ratio of 3.55 in agreement with the improvement in the mechanical properties. The chip length decreased with the increase of the extrusion ratio depending on a decrease in the ductility, while SEM images showed that the AZ31 sample produced using intermediate extrusion ratio had the best hole edge quality and least burr formation.en_US
dc.identifier.doi10.1177/09544089221080820
dc.identifier.endpage2094en_US
dc.identifier.issn0954-4089
dc.identifier.issn2041-3009
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85124757889en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage2082en_US
dc.identifier.urihttps://doi.org/10.1177/09544089221080820
dc.identifier.urihttps://hdl.handle.net/20.500.14551/18930
dc.identifier.volume236en_US
dc.identifier.wosWOS:000759709900001en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofProceedings Of The Institution Of Mechanical Engineers Part E-Journal Of Process Mechanical Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectAZ31 Magnesium Alloyen_US
dc.subjectExtrusion Parametersen_US
dc.subjectDrillingen_US
dc.subjectThrust Forceen_US
dc.subjectSevere Plastic-Deformationen_US
dc.subjectHigh-Temperature Deformationen_US
dc.subjectMechanical-Propertiesen_US
dc.subjectCutting Parametersen_US
dc.subjectChip Morphologyen_US
dc.subjectHole Qualityen_US
dc.subjectThrust Forceen_US
dc.subjectGrain-Sizeen_US
dc.subjectMicrostructureen_US
dc.subjectTextureen_US
dc.titleInfluence of extrusion parameters on drilling machinability of AZ31 magnesium alloyen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu