Bazı kişisel bakım ürünü kremlerde eser elementlerin indüktif eşleşmiş plazma-kütle spektrometri ile tayini
Özet
Kozmetiklerdeki ağır metaller, boyar madde içerebilen kozmetik ürünlerin de
içerisinde olduğu ürünlerde belirli düzeyde doğal bileşen olarak bulunabilmelerinin yanında
çevrede yaygın bulunmaları ve kararlı bir kimyasal yapıya sahip olmalarından dolayı ürün
içerisinde safsızlık olarak yer alabilmektedir. Toksik etkileri göz önüne alındığında ve
özellikle kozmetiklerin pek çok kişi tarafından yoğun biçimde kullanılması bu elementlerin
sağlığımız açısından önemini arttırmaktadır. Kremler vasıtasıyla deri yolu ile birlikte vücuda
alımı sağlanır. Kozmetik kaynaklı vücuda alınan eser elementler yıllar içinde birikime ve bu
birikim de hücre veya doku zararına neden olmaktadır. Bu çalışma, ticari olarak satılan ve
herkesin kolaylıkla ulaşabileceği marketlerden alınan 50 krem örneğinde alüminyum, krom,
demir, nikel, bakır, çinko, kadmiyum, antimon ve kurşun elementlerinin miktarlarının
belirlenmesi amacı ile planlandı.
Çözünürleştirme yöntemi olarak mikrodalga çözünürleştirme yöntemi kullanıldı.
Çözünürleştirilen krem örneklerindeki elementlerin analizleri İndüktif Eşleşmiş Plazma-
Kütle Spektromere (ICP-MS) cihazı ile gerçekleştirildi. Analizler sonucunda 50 kişisel bakım
ürünü krem örneğinde bulunan element ortalama değerleri şu şekildedir: Alüminyum için
1,037±1,439 mg/kg, krom için 0,066±0,135 mg/kg, demir için 3,697±1,200 mg/kg, nikel için
0,083±0,075 mg/kg, bakır için 0,103±0,083 mg/kg, çinko için 0,751±1,561 mg/kg, kadmiyum
için 0,012±0,014 mg/kg, antimon için 0,044±0,085 mg/kg, kurşun için 0,018±0,021 mg/kg.
Çalışmada matris etkilerini en aza indirgemek, girişimleri önlemek amacı ile İndüktif
Eşleşmiş Plazma-Kütle Spektrometri cihazı ile çalışılırken standart ilave metodu kullanıldı.
Elde edilen veriler sonucunda çalışılan yöntemlerin tüm verileri için, RSD (Relative Standard
Deviation) değerleri % 2’nin altındadır. Tayin alt sınırı (LOD) ve kantitatif alt sınırı (LOQ)
ise, alüminyum için LOD:1,527 ppb ; LOQ:5,09 ppb, krom için LOD:0,03017 ppb ;
LOQ:0,1006 ppb, demir için LOD:0,9904 ppb ; LOQ:3,3013 ppb, nikel için LOD:0,03577
ppb ; LOQ:0,1192 ppb, bakır için LOD:0,02644 ppb ; LOQ:0,0811 ppb, çinko için
LOD:0,9963 ppb ; LOQ:3,321 ppb, kadmiyum için LOD:0,006214 ppb ; LOQ:0,0207 ppb,
antimon için LOD:0,005629 ppb ; LOQ:0,0188 ppb ve kurşun için LOD:0,01683 ppb ;
LOQ:0,0561 ppb’dir. Heavy metals in cosmetics can also be found at certain level as a natural component
in cosmetic products containing dyestuffs. In addition to this, due to that they are widespread
in the environment and have a stable chemical structure they can be included in the product as
impurities. When we consider the toxic effects, the intense use of cosmetics by most of the
people, the importance of these elements for our health is cannot be ignored. It is supplied to
body through the skin by the creams which contains them. The trace elements of cosmetic
origin are taken to the body and they accumulate over years and this accumulation can
damage the cells and tissues. This work is planned to determine the amount of aluminum,
chromium, iron, nickel, copper, zinc, cadmium, antimony and lead elements in 50 cream
samples which are easily accessible to everyone in the markets.
Microwave resolution method were used as the resolution method. Analyzes of the
elements in the cream samples that were solubilized were performed by Inductively Coupled
Plasma-Mass Spectrometry (ICP-MS).
The average values found in 50 cream samples as the result of analysis are as follows:
1,037±1,439 mg/kg for aluminum, 0,066±0,135 mg/kg for chromium, 3,697±1,200 mg/kg for
iron, 0,083±0,075 mg/kg for nickel, 0,103±0,083 mg/kg for copper, 0,751±1,561 mg/kg for
zinc, 0,012±0,014 mg/kg for cadmium, 0,044±0,085 mg/kg for antimony, 0,018±0,021 mg/kg
for lead was found as. The standard addition method was used when working with the ICPMS
device
in
order
to
minimize
the
matrix
effects
in
the
study
and
to
prevent
interference.
As
a
result
of
the
obtained
data,
Relative
Standard
Deviation
(RSD)
values
are
below
2%
for
all
data
of
the
methods
used.
Determination
Limits(LOD)
and
Quantification
Limits(LOQ)
of
the
analyzes
made by ICP-MS were LOD:1,527 ppb ; LOQ:5,09 ppb for aluminum ,
LOD:0,03017 ppb ; LOQ:0,1006 ppb for chromium, LOD:0,9904 ppb ; LOQ:3,3013 ppb for
iron, LOD:0,03577 ppb ; LOQ:0,1192 ppb for nickel, LOD:0,02644 ppb ; LOQ:0,0811 ppb
for copper, LOD:0,9963 ppb ; LOQ:3,321 ppb for zinc, LOD:0,006214 ppb ; LOQ:0,0207
ppb for cadmium, LOD:0,005629 ppb ; LOQ:0,0188 ppb for antimony and LOD:0,01683 ppb
; LOQ:0,0561 ppb for lead.
Koleksiyonlar
- Tez Koleksiyonu [574]